top of page
INTEGRATION OF HUMAN AND MECHANICAL TECHNOLOGY
Feature
-
Automatic memory modular design.
-
Electronic segmented pad control.
-
The individual component of pressure controlling system.
-
Automatic positioning and preset parameter.
-
Pressure can be applied in accordance with different edge.
SANDING HEAD TYPE
Head Type A
Contact roller
Roller dia. (mm):300
Head Type W
Combination roller with electronic segmented pad
Roller dia. (mm):130
Head Type C
Crossbelt sanding unit with electronic segmented pad
Roller dia. (mm):215
Head Type PR
Polishing roller
Roller dia. (mm):150 / 200
COLOR DIGITAL READOUT CONTROLLED
-
The machine equiped with industrial computer along with colorful touch screen.
-
Specially designed to automatic operation such as roller, table control, modular setting and error message.
-
Chinese/English version switchable.
SENSOR SYSTEM
Scanning by 20mm pitch to analysis of workpiece size and input to the computer for the pressure setting. Computer-controlled cylinder, thereby driving the pressure beam sanding. The cylinder is clean-free.
AUTOMATIC STOP
Limit switches are fitted at both sides of the sanding belt to prevent the belt running from the track. The machine will stop automatically if there is no air supply, no sanding belt mounted, or if the belt becomes loose. Only the elevation driving motor will function. The machine will brake immediately if the sanding belt breaks during operation, providing maximum safety for operator and machine.
INFEED EMERGENCY BRAKE
Infeed emergency brake for operator stop the machine easily.
EMERGENCY STOP BUTTON
Below the PLC touch screen, there is an emergency stop button for operator press immediately.
DISC BRAKE
SANDING BELT OSCILLATION CONTROL
-
The sanding belt oscillation is controlled by a dust proof air eye.
-
The sanding belt can oscillate in the event of power failure.
-
The oscillation range of the sanding belt is 15 - 20mm.
-
The reverse and cross sanding on the panel creates a better clarity of grain, thus greatly extending the life of the sanding belt.
QUICK RELEASE LOCKING HANDLE
By using turn to loose the handle and pad, replacing sanding belt easily.
INVERTER
The machine is built with a high performance frequency inverter which can be adjusted for any desired speed to accommodate a variety of paint and panel characteristics. (Optional)
CONVEYOR DRIVING SYSTEM
Conveyor speed controlled by inverter, it will automatically compensated to the best feeding status. Thus, the computer can be processed more accurate.
HIGH QUALITY CONVEYOR BELT
The machine employs an Italian imported high quality conveyor belt, ensuring extremely smooth feeding, minimum wear, and break free performance under normal usage.
CONVEYOR BELT POSITION WHEEL
Conveyor belt tracking adjusted by position wheel.
VACUUM SUCTION
This will not only prevent the veneer or lacquer from being over-sanded or the panel from slipping. (Optional)
BELT CLEANING DEVICE
To ensure a clean and smooth grain surface on the abrasive belt, air is blown to thoroughly clean any dust.This greatly increases the belt's life. Once the conveyor starts, the device is also starts. A timer is equipped for controlling the sanding intervals. (Optional)
SEGMENTED PAD SANDER CROSS BELT WITH SEGMENTED PAD
-
Automatic memory modular design.
-
Electronic segmented pad control.
-
The individual component of pressure controlling system.
-
Automatic positioning and preset parameter.
-
Pressure can be applied in accordance with different edge.
BRUSH ROLLER
Clear away the dust on the working piece in the final step.
POLISHING ROLLER
This polishing roller not only clear away the dust on the working piece but also do the final polishing. (Optional)
SPECIFICATIONS
※Design and specifications are subject to change without prior notice.
bottom of page