top of page
TABLE FIXED SANDER
Table fixed sander with strong lifting structure to create a stable sanding ability. It can go with bottom sander to upgrade the productivity for your production line, meanwhile, decrease the labor cost.
Available in 600, 900, 1100, 1300mm working width.
Available in double and triple heads.
Digital readout controller.
Air jet cleaner.
Belt oscillation controlled.
Hydraulic conveyor driving.
In-feed emergency brake.
Four lifting poles.
Quick release locking handle.
Conveyor belt positioning.
Micro-adjustment by hand wheel.
Truly endless Italian belt.
Amp and Volt meter.
FSD - Upper Movement/
Table Fix Sander
SANDING HEAD TYPE
ROLLER - ROLLER
ROLLER - ROLLER - ROLLER
ROLLER - PAD
ROLLER - ROLLER - PAD
DIGITAL READOUT CONTROLLED
The conveyor lifting by digital controller and PLC touch screen.
Specially designed to automatic operation such as roller, table control and error message.
Chinese/English version switchable.
Limit switches are fitted at both sides of the sanding belt to prevent the belt running from the track. The machine will stop automatically if there is no air supply, no sanding belt mounted, or if the belt becomes loose. Only the elevation driving motor will function. The machine will brake immediately if the sanding belt breaks during operation, providing maximum safety for operator and machine.
INFEED EMERGENCY BRAKE
Infeed emergency brake for operator stop the machine easily.
EMERGENCY STOP BUTTON
Below the PLC touch screen, there is an emergency stop button for operator press immediately.
BELT CLEANING DEVICE
To ensure a clean and smooth grain surface on the abrasive belt, air is blown to thoroughly clean any dust.This greatly increases the belt's life. Once the conveyor starts, the device is also starts. A timer is equipped for controlling the sanding intervals. (Optional)
SANDING BELT OSCILLATION CONTROL
The sanding belt oscillation is controlled by a dust proof air eye.
The sanding belt can oscillate in the event of power failure.
The oscillation range of the sanding belt is 15 - 20mm.
The reverse and cross sanding on the panel creates a better clarity of grain, thus greatly extending the life of the sanding belt.
HYDRAULIC DRIVE CONVEYOR BELT
The super lightweight driving system is mounted at the end of the conveyor table, ensuring maximum feed accuracy and stability. A powerful hydraulic driving system automatically adjusts to the correct pressure regardless of the panel weight or plate holding pressure. The system eliminates belt slipping or chattering while running. (Optional)
After being laminated with the veneer, the particle board usually suffers from bending. This is solved by the very close pressure plates which in conjunction with a vacuum suction device, will straighten the panels. This will not only prevent the veneer or lacquer from being over-sanded or the panel from slipping. (Optional)
HIGH QUALITY CONVEYOR BELT
The machine employs an Italian imported high quality conveyor belt, ensuring extremely smooth feeding, minimum wear, and break free performance under normal usage.
CONVEYOR BELT POSITION WHEEL
Conveyor belt tracking adjusted by position wheel.
SUPERIOR PRESSURE SHOES
The pressure plate is welded from steel plate, hard chrome plated for Maximum stability and smoothness panel feeding is achieved through the pressure plate incorporated with rubber covered pressure roller.
QUICK RELEASE LOCKING HANDLE
By using quarter turn to loose the handle and pad, replacing sanding belt easily.
The machine is built with a high performance frequency inverter which can be adjusted for any desired speed to accommodate a variety of paint and panel characteristics. (Optional)
Clear away the dust on the working piece in the final step.
This polishing roller not only clear away the dust on the working piece but also do the final polishing. (Optional)
bottom of page